How to install CyberPanel?
Introduction:
This guide will walk you through how to install the self-hosted free CyberPanel control panel on your VPS / server.
Requirements:
- Server with a fresh install Linux VPS of Centos 7.x, Centos 8.x, Ubuntu 18.04, Ubuntu 20.04, AlmaLinux 8.
- Python 3.x.
- 1024MB RAM, or higher.
- 10GB Disk Space.
Installing CyberPanel:
Step 1: Connect to your server via SSH
The installation of CyberPanel is quite simple. First, log into your server via SSH as the root user (sudo will not work). You can get IP address and root password from your VPS control panel.
Step 2: Update packages
For Ubuntu: sudo apt update && sudo apt upgrade -y
For CentOS/Alma/Rocky:
sudo yum check-update sudo yum update
Step 2: Run the installation script
Run the following command. It will initiate the automated installation script, which will prompt you for a few decisions about which version of LiteSpeed and which add-ons you would like to install.
sh <(curl https://cyberpanel.net/install.sh || wget -O - https://cyberpanel.net/install.sh)
Step 3: Select the version of LiteSpeed that you would like to use
We will go for free CyberPanel installation
CyberPanel Installer v2.1.2 RAM check : 184/981MB (18.76%) Disk check : 7/30GB (27%) (Minimal 10GB free space) 1. Install CyberPanel with OpenLiteSpeed. 2. Install Cyberpanel with LiteSpeed Enterprise. 3. Exit. Please enter the number[1-3]:
So we will insert 1 for free CyberPanel
Step 4: Select options and addons
You will be presented with a series of prompts for different options and add-ons that are available.
Full Service (default Y):
- PowerDNS - an open-source DNS server
- Postfix - open-source mail transfer agent
- Pure-FTPd - open-source FTP server
Remote MySQL (default N):
- Allow for your Database to be installed on a remote server
CyberPanel Version (default Latest Version):
- You can choose to install a previous version of CyberPanel, or press Enter to install the latest
Password (default “1234567”):
- It is recommended that you use “s” to set your own strong password
Memcached (default Y):
- Distributed memory object caching system
Redis (default Y):
- In-memory data structure store, used as a database, cache, and message broke
Watchdog (default Yes):
- Kernel watchdog is used to monitor if a system is running. It is supposed to automatically reboot hanged systems due to unrecoverable software errors
Step 5: Installation:
The installation process will proceed automatically. It will take 5-10 minutes, depending on the speed of your server.
Step 6: Finalize Installation
At the end of the installation process, you will be presented with the following screen which contains important information about your configuration. Select and copy it to a safe location for future reference.
################################################################### CyberPanel Successfully Installed Current Disk usage : 7/30GB (26%) Current RAM usage : 313/981MB (31.91%) Installation time : 0 hrs 11 min 0 sec Visit: https://<your server's IP address>:8090 Panel username: admin Panel password: <the password you set during installation> Visit: <your server's IP address>:7080 WebAdmin console username: admin WebAdmin console password: TSXMwny4zVeDg37K Visit: https://<your server's IP address>:8090/rainloop/?admin Rainloop Admin username: admin Rainloop Admin password: gQKFWm9O3nr7Xn Run cyberpanel help to get FAQ info Run cyberpanel upgrade to upgrade it to latest version. Run cyberpanel utility to access some handy tools . Website : https://www.cyberpanel.net Forums : https://forums.cyberpanel.net Wikipage: https://docs.cyberpanel.net Docs : https://cyberpanel.net/docs/ Enjoy your accelerated Internet by CyberPanel & OpenLiteSpeed ################################################################### If your provider has a network-level firewall Please make sure you have opened following port for both in/out: TCP: 8090 for CyberPanel TCP: 80, TCP: 443 and UDP: 443 for webserver TCP: 21 and TCP: 40110-40210 for FTP TCP: 25, TCP: 587, TCP: 465, TCP: 110, TCP: 143 and TCP: 993 for mail service TCP: 53 and UDP: 53 for DNS service Your provider seems blocked port 25 , E-mail sending may not work properly.
Step 7: Restart Server:
Would you like to restart your server now? [y/N]:
Enter “y” to restart. Or enter “reboot” later after you have performed other desired operations.
Step 8: Access CyberPanel:
After the successful installation you can access CyberPanel using the details below (make sure to change):
URL: https://<Your Server's IP Address>:8090 Username: admin Password: <the password you set during installation>
Finally:
We show you here how to install CyberPanel and how to log in to its dashboard.
