Installing CyberPanel
How to install CyberPanel in your server / VPS

Introduction:

This guide will walk you through how to install the self-hosted free CyberPanel control panel on your VPS / server

Requirements:

  • Server with a fresh install Linux VPS of Centos 7.x, Centos 8.x, Ubuntu 18.04, Ubuntu 20.04, AlmaLinux 8
  • Python 3.x
  • 1024MB RAM, or higher
  • 10GB Disk Space

Installing CyberPanel:

Step 1: Connect to your server via SSH

The installation of CyberPanel is quite simple. First, log into your server via SSH as the root user (sudo will not work). You can get IP address and root password from your VPS control panel.

Step 2: Update packages

For Ubuntu: sudo apt update && sudo apt upgrade -y
For CentOS/Alma/Rocky:

sudo yum check-update
sudo yum update

Step 2: Run the installation script

Run the following command. It will initiate the automated installation script, which will prompt you for a few decisions about which version of LiteSpeed and which add-ons you would like to install.

sh <(curl https://cyberpanel.net/install.sh || wget -O - https://cyberpanel.net/install.sh)

Step 3: Select the version of LiteSpeed that you would like to use

We will go for free CyberPanel installation

CyberPanel Installer v2.1.2
RAM check : 184/981MB (18.76%)
Disk check : 7/30GB (27%) (Minimal 10GB free space)
1. Install CyberPanel with OpenLiteSpeed.
2. Install Cyberpanel with LiteSpeed Enterprise.
3. Exit.
  Please enter the number[1-3]:

So we will insert 1 for free CyberPanel

Step 4: Select options and add-ons

You will be presented with a series of prompts for different options and add-ons that are available.

Full Service (default Y):

Remote MySQL (default N):

  • Allow for your Database to be installed on a remote server

CyberPanel Version (default Latest Version):

  • You can choose to install a previous version of CyberPanel, or press Enter to install the latest

Password (default “1234567”):

  • It is recommended that you use “s” to set your own strong password

Memcached (default Y):

  • Distributed memory object caching system

Redis (default Y):

  • In-memory data structure store, used as a database, cache, and message broke

Watchdog (default Yes):

  • Kernel watchdog is used to monitor if a system is running. It is supposed to automatically reboot hanged systems due to unrecoverable software errors

Step 5: Installation:

The installation process will proceed automatically. It will take 5-10 minutes, depending on the speed of your server.

Step 6: Finalize Installation

At the end of the installation process, you will be presented with the following screen which contains important information about your configuation. Select and copy it to a safe location for future reference.

###################################################################
                CyberPanel Successfully Installed
                Current Disk usage : 7/30GB (26%)
                Current RAM  usage : 313/981MB (31.91%)
                Installation time  : 0 hrs 11 min 0 sec
                Visit: https://<your server's IP address>:8090
                Panel username: admin
                Panel password: <the password you set during installation>
                Visit: <your server's IP address>:7080
                WebAdmin console username: admin
                WebAdmin console password: TSXMwny4zVeDg37K
                Visit: https://<your server's IP address>:8090/rainloop/?admin
                Rainloop Admin username: admin
                Rainloop Admin password: gQKFWm9O3nr7Xn
             Run cyberpanel help to get FAQ info
             Run cyberpanel upgrade to upgrade it to latest version.
             Run cyberpanel utility to access some handy tools .
              Website : https://www.cyberpanel.net
              Forums  : https://forums.cyberpanel.net
              Wikipage: https://docs.cyberpanel.net
              Docs    : https://cyberpanel.net/docs/
            Enjoy your accelerated Internet by
                CyberPanel & OpenLiteSpeed
###################################################################
If your provider has a network-level firewall
Please make sure you have opened following port for both in/out:
TCP: 8090 for CyberPanel
TCP: 80, TCP: 443 and UDP: 443 for webserver
TCP: 21 and TCP: 40110-40210 for FTP
TCP: 25, TCP: 587, TCP: 465, TCP: 110, TCP: 143 and TCP: 993 for mail service
TCP: 53 and UDP: 53 for DNS service
Your provider seems blocked port 25 , E-mail sending may not work properly.


Step 7: Restart Server:

Would you like to restart your server now? [y/N]:

Enter “y” to restart. Or enter “reboot” later after you have performed other desired operations.

Step 8: Access CyberPanel:

After the successful installation you can access CyberPanel using the details below (make sure to change):

URL: https://<Your Server's IP Address>:8090 
Username: admin
Password: <the password you set during installation>


Finally:

We show you here how to install CyberPanel and how to log in to its dashboard.


Administrator 2 May, 2022
Share this post
Tags
Archive
Sign in to leave a comment
Migrate from CentOS to AlmaLinux
CentOS to AlmaLinux migration